With the $0 tax stamp kicking off in January 2026, the market is demanding innovative suppressors from current and new manufacturers. At SHOT Show, every current suppressor manufacturer had something new to unveil, and several new manufacturers popped up on the scene. Now more than ever, it is a buyer’s market where there is something to fit everyone’s needs or desires. From short K cans to bolt-action lightweight hunting suppressors, to new 3D printed designs, there were a ton of new suppressors to check out at this year’s SHOT Show. Here’s everything I saw at the show!
39 Suppressors From SHOT Show
Dead Air CT5P
The new CT5P Patrol Silencer was designed for law enforcement officers to be ultra-lightweight, have low back pressure, and be gas-regulated. The CT5P has a shorter, lighter profile because it is designed without the HUB feature. It also reduces muzzle flash and spark to near undetectable levels. The CT5P can sustain full-auto fire and has been tested to the SOCOM SURG standard. It is rated for 5.56 NATO and 6mm ARC.
Advertisement — Continue Reading Below
Dead Air Nomad Ti OTB
The Nomad Ti OTB is an over-the-barrel design that minimizes the firearm’s overall length when attached. It only adds 4.6 inches and can suppress calibers up to 300 RUM and 7mm Backcountry. It is designed for bolt-action and semi-automatic rifles. The suppressor weighs just 10.5 ounces thanks to its titanium design. The Nomad Ti OTB features the Xeno muzzle device architecture machined into the 3D-printed silencer.
Dead Air RXD910Ti
Advertisement — Continue Reading Below
Dead Air and Ruger teamed up once again to bring you another RXD suppressor. The 910Ti is a 9mm optimized silencer that also reduces noise from 10mm pistol cartridges. This suppressor weighs 11.4 ounces in a 7.7-inch package. It is also full-auto-rated and compatible with 5.7 and 300 Blackout subsonic ammunition.
Rugged Suppressors SUB-9
The Rugged Suppressors SUB-9 is a compact suppressor designed with pistol-caliber carbines (PCCs) and 9 mm submachine gun-style platforms in mind. Built around Rugged’s coaxial chamber design, the Sub9 aims to provide effective sound mitigation in a shorter overall package, about 6.8 inches in length with its included mount and roughly 6.6 inches without, while keeping handling balanced and manageable.
Advertisement — Continue Reading Below
Thunder Beast Arms SPIRO
The SPIRO is a low-back-pressure gas gun suppressor that is seriously quiet at the muzzle. I was sent one of these suppressors before it was released at SHOT Show, and I was surprised by how quiet it is. The total length is 5.9 inches, and it weighs 15.5 ounces. It is made from Haynes 282, which is stronger than the popular Inconel 718. Thunder Beast Arms advertises that it reduces recoil by approximately 40% compared to a bare muzzle. After shooting it on a 16-inch barrel with 77-grain ammunition, I can say it is one of the softest shooting suppressors.
Ambient Arms EXO 5.56
Advertisement — Continue Reading Below
The Ambient Arms suppressor was the talk of the town at SHOT Show and was a hit at range day. The EXO suppressor has intake channels that harness ambient air to drastically reduce post-shooting temperatures, decimate the report of your rifle at the muzzle by about 35 dB, and materially mitigate unwanted blowback. The patent-pending Ambient Intake System features intake ports that pair with strategic low‑pressure zones to draw cool air directly into the suppressor. This intake mixes ambient air with hot muzzle gases to reduce operating temperatures by up to 75%. This is the coldest-running suppressor ever created. The 5.56 is compatible with 5.56, .223 Wylde, and 6mm ARC calibers. It is HUB Compatible and full auto rated, and passes full SOCOM Surge-Testing. It is recommended to perform detailed cleaning every 2,500 rounds.
Bergara BTi30
The BTi30 is Bergara’s first foray into the suppressor market. It is a Grade 5 titanium suppressor that weighs 12.9 ounces and measures 6.5 inches. Bergara ships it with a vented and a sealed cap for either reduced blowback performance or maximum sound suppression. It is HUB compatible, so it can be direct mounted or attached using your favorite HUB mounting setup. Bergara engineered the BTi30 to minimize point-of-impact shift and tighten groupings up to 25% versus traditional suppressors or bare muzzles, making this the ultimate hunting suppressor.
Advertisement — Continue Reading Below
Deadline Defense Suppressors
Deadline Defense is a new suppressor brand that just launched two new cans at SHOT Show. The Reaper is an ultra-compact suppressor designed for hard use with 5.56 ammunition. It delivers exceptional suppression even in its compact footprint. The COA-3 is Deadline Defense’s .30 cal suppressor for multi-platform use in the same package. Both suppressors weigh 9.6 ounces and have a length of 5.25 inches. The only difference is the bore dimensions and decibel reduction. The Reaper has a 38.48 dB reduction from unsuppressed, while the COA-3 has a 28.53 dB reduction from unsuppressed.
SIG SAUER HEXIUM 300
Advertisement — Continue Reading Below
The new HEXIUM line of suppressors from SIG includes three titanium options and one Inconel core model. These suppressors all have low backpressure, are quiet, and have cleaner tones. These suppressors are outfitted with a new modular tool-less end cap accessory mounting system. They are all HUB compatible and ship with a direct thread steel mount. Externally, these suppressors feature a HEX pattern with a black hi-temp Cerakote finish. The HEXIUM 300 is 15 ounces and 8.95 inches. The HEXIUM 5.56 and HEXIUM 7.62 are both 11 ounces and 6.2 inches. The HEXIUM 5.56 Inconel suppressor weighs 20 ounces and has a length of 5.9 inches.
BOE IncoLite 9
The IncoLite 9 is fully printed from Inconel 718, but with creative geometry to add strength where it’s needed and cut weight where it’s not. It weighs just 6.5 ounces and is 5 inches long. The IncoLite 9 is compatible with any 9mm, as well as 300 Blackout and 350 Legend (SUBS ONLY). It is HUB compatible, so you can direct thread, use boosters, or your favorite QD adapter.
Advertisement — Continue Reading Below
Silent Steel USA Streamer
Silent Steel USA has three new suppressors in the Streamer line rated for 5.56, 7.62, and 9mm. Each comes with your choice of mount, whether QDL, direct thread, or HUB. These suppressors use FLOW-IQ technology to direct gases forward while remaining lightweight, modular, and easy to clean. They are 7.6 inches long and weigh 17.28 ounces. They are full auto rated. Silent Steel USA turbine + filter baffle-less system redirects and cools gases in a swirling path, delivering consistent low-tone, minimal blowback, reduced first-round pop, and superb heat mitigation.
Silent Steel USA Compact Streamer
Advertisement — Continue Reading Below
The Compact line from Silent Steel USA is also new and features three caliber suppressors in 5.56, 7.62, and 9mm. They also come with your choice of mount and are HUB compatible. These are still full-auto rated, but in a medium-sized package. They are 5.9 inches long and weigh 15.87 ounces. The Compact model features zero-flash and is ideal for CQB.
Silent Steel USA Micro Streamer
The Micro Streamer line offers the same three caliber suppressors with various mounting options, just like the Compact and original Streamer. The Micro suppressor is 4.25 inches long and weighs 12.34 ounces. These are designed for PDWs and SBRs as they don’t add much weight or additional length to the gun. It is short-barrel and full-auto rated.
SilencerCo S98
The S98 suppressor was designed for 9mm handguns. The bore sits below the shooter’s line of sight, allowing for a clean sight picture with zero interference. It is 5.54 inches and weighs 7 ounces. It ships with SilencerCo’s dedicated pistol QD mount, making it easy to swap between different pistols.
EOTech DCBL
EOTECH launched a line of suppressors, which is all-new to the brand. These are made with a vent-forward design to reduce back pressure, a cooler-running suppressor, and cleaner shooting. The DCBL line includes a 9mm PCC, 7.62, and 5.56 suppressor. They are all made of Grade 5 titanium and finished with high-temp Cerakote. The lengths vary from 7.3 to 8.8 inches depending on the model. They are all HUB compatible. The weight of each suppressor body is 9.3 ounces (9mm), 17.4 ounces (7.62), and 13.7 ounces (5.56).
PWS BDE7.62-Ti Gold Cerakote
This suppressor was wild to see in person. This exclusive gold Cerakote finish is available only in the WRMFZY x PWS edition. This suppressor is 3D printed titanium with a modular design, so you can remove baffles and customize the overall length of the suppressor. It is HUB-compatible and can be used with most HUB-mount setups.
GEMTECH Nebula 5.7
The Nebula suppressor was designed for use with 5.7, .22LR, .17HMR, and .22WMR. This suppressor features a 3D-printed titanium core and a stainless steel blast baffle. It weighs 9 ounces and measures 7.8 inches. The Nebula is HUB compatible and compatible with a wide range of mounts for rimfire and PDW setups. It is also full-auto rated.
GEMTECH Neutron 7.62
The Neutron 7.62 was designed for use with short-barreled machine guns, all the way to your favorite bolt-action or single-action hunting rifle. It is rated for use with 5.7x28mm to 300 Win Mag. The Neutron is full-auto-rated, but there are some barrel restrictions listed on the GEMTECH website. It weighs 14.6 ounces, measures 6.6 inches, and is HUB compatible.
GEMTECH Abyss 7.62
The Abyss suppressor is a hard-use suppressor designed to reduce muzzle flash, decrease overall sound, and reduce gas blowback. GEMTECH designed the Abyss with a greater wall thickness than many competitors, while keeping the suppressor at a similar or lesser overall weight. It is rated for use with 5.7x28mm to 300 Win Mag. You can direct-mount it, or it is HUB Compatible. The overall length is 6.8 inches, and the weight is 16.2 ounces. The GM-S1 End Cap is designed for minimized muzzle flash. It is short barrel and full auto rated.
GEMTECH Abyss 5.56
The Abyss 5.56 is similar to the 7.62 model, except it is rated for 5.56, 6mm ARC, and 5.7x28mm. It weighs 16 ounces and is 6.2 inches, so slightly smaller and lighter than its big brother version. The Abyss is still full-auto rated and HUB compatible. It also features the GM-S1 End Cap to reduce muzzle flash.
SureFire SOCOM6-MINI4
The new Mini4 from SureFire is the ultimate 6mm ARC suppressor, designed with a high-temp Inconel superalloy. It features 60% less back pressure for less toxic gas in the operator’s face, improved reliability, superior recoil control, and a cleaner firearm. It is 5.8 inches and weighs 16 ounces. The Mini4 features a new muzzle design that significantly reduces detection of frontal flash and improves durability against physical impacts.
HUXWRX Flow 45 M
The HUXWRX Flow 45 M is a fully DMLS (Direct Metal Laser Sintering) printed in Grade 23 titanium. It uses HUX’s famous. Flow-through technology for significant noise reduction and recoil mitigation. This suppressor is full-auto rated for a magazine-fed 45 ACP platform. It ships with a piston and booster assembly. It weighs 7.4 ounces and is 8.5 inches long. You can also switch to the compact K configuration to change the weight to 5.4 ounces and the overall lengthto 6.3 inches. Some sound suppression will be compromised in the shorter configuration.
Ridegline HUSH
The HUSH suppressor was one of the more unique suppressors at SHOT Show. It integrates an Inconel 718 printed core with a composite shell to form a lighter suppressor. It weighs 20 ounces and is 10 inches long. The over-barrel design only extends the barrel by 5 inches, which is what ultimately matters when choosing a rifle and suppressor combination. It also comes with an optional muzzle brake end cap.
Savage Arms AccuCan AC30 B.O.B.
The new AC30 B.O.B. is a modular back-over-barrel suppressor with a replaceable core and end cap. It partially encloses the barrel, so it doesn’t add much length to the end of the gun. The thread mount is what is serialized. It features built-in self-cleaning carbon cutters. The suppressor is 8 inches long and weighs 13.7 ounces. It is rated for .30 caliber cartridges up to 300 Win. Mag. It is recommended for use as a hunting suppressor as it requires a controlled rate of fire of one round every one second for up to 20 rounds before needing to cool.
Precision Armament TiTrex
Precision Armament advertises the TiTrex suppressor as the first 3D printed titanium suppressor with unlimited exchangeability and upgradeability. It features patent-pending X-CORE Weld-Free Suppressor Exchangeable Core technology which allows the end consumer to upgrade the suppressor to whatever the latest version is without having to purchase another suppressor. It also features Precision Armament’s proprietary NURBS suppressor technology, an additivelymanufactured, surface-modeled baffle architecture that delivers superior acoustic performance through baffle topology alone. The result is lower sound pressure levels and minimal first-round pop in a lightweight, compact design. The suppressor body is 5.9 inches and weighs 7.2 ounces. It is rated for .300 RUM with no barrel-length restrictions. It is also HUB compatible and accepts SilencerCo’s Bravo-style front attachments.
Lyman SONICORE
Lyman is bringing a popular European suppressor design to the US and building suppressors tailored to the American market. By combining a time-tested European design with Lyman’s U.S. manufacturing expertise, Lyman delivers a Sonicore suppressor that gives hunters, competitive shooters, and firearm enthusiasts what they care about most: consistent noise reduction, reduced recoil, and light, durable construction. The Sonicore design offers modularity for direct thread or overbarrel mounting options, allowing users to tailor the suppressor to their specific use case. This modularity also makes it easy to disassemble, clean, and maintain the suppressor. There are six new suppressors from Lyman using the Sonicore design.
Banish 556
The new Banish 556 is built with an additive-manufactured Inconel core and a stainless-steel blast chamber. It is optimized for 5.56 NATO/.223 REM and features controlled-flow technology to reduce back pressure. The Banish 556 is built to withstand aggressive firing schedules, including full-auto use. It also minimizes flash and does a great job suppressing sound. On a 16-inch AR-15, it averages 132.4 dB, and on a 10.5-inch AR-15, it averages 137 dB. It weighs 15.6 ounces and measures 6.3 inches. It utilizes an industry-standard HUB mount and includes a 1/2×28 direct-thread mount.
Banish 30-V2
The Banish 30-V2 is a .30-caliber that can handle anything from a .17HMR up to a .300 Weatherby Magnum. It uses an industry-standard hub mount and is lighter, shorter, and quieter than the original BANISH 30. It is modular and can be changed from 6.4 inches to 8.17 inches. The weight changes from 9.5 ounces to 12.4 ounces in the longer configuration. In the long configuration, tested on a .308-caliber rifle, the decibel reduction was 34.5 dB, bringing it well below the safe hearing threshold. This suppressor uses the Stifle baffles, a universal baffle stack used in most BANISH suppressors that can be reassembled in any order.
JK Armament PRO-KOR 5.56K
The PRO-KOR 5.56K is 3D printed from 17-4 stainless steel & Haynes 282. It is designed to be HUB-compatible and user-serviceable. It comes with the War Eagle muzzle device for easy mounting. This suppressor is best used with 5.56 and 6mm ARC cartridges. It can withstandextreme heat, pressure, and cyclic stress associated with short-barreled and high-round-count use. It measures 5.35 inches and weighs 14.3 ounces.
JK Armament PRO-KOR 9K Ti
The PRO-KOR 9K Ti is a 3D printed 9mm subgun suppressor. Its design balances sound suppression with minimal weight and length, giving operators a versatile suppressor that integrates seamlessly on SBRs, PCCs, and submachine gun-style firearms. It ships with a titanium tri-lug mount for easy on/off removal. The suppressor features a user-serviceable end cap for easy maintenance and configuration changes. It weighs 12.2 ounces and measures 5.5 inches.
JK Armament PRO-KOR .30 Ti
The PRO-KOR .30 Ti is made of Grade 5 titanium and can be used with full-auto fire. It weighs 13.1 ounces and measures 7 inches. Internal flow paths improve gas management, reduce flash signatures, and deliver effective sound suppression without introducing excessive backpressure.This suppressor can be used across a wide range of .30-caliber loads.
WHY OUR ARTICLES/REVIEWS DO NOT HAVE AFFILIATE LINKS
Affiliate links create a financial incentive for writers to promote certain products, which can lead to biased recommendations. This blurs the line between genuine advice and marketing, reducing trust in the content.
