Anchor ads are not supported on this page.

Dead Air Wolverine: A Purpose Built AK47 Suppressor

If you’re looking for a suppressor for your AK, look no further than the Dead Air Wolverine. This 7.62×39 can interfaces directly with the front sight detent on your AK pattern rifle.

Dead Air Wolverine: Simple On/Off for Your AK

Suppressing AK pattern rifles has always been a bit more difficult than AR-pattern rifles. The muzzle area on most AK rifles isn’t threaded like an AR, so it loses that natural attachment point. That’s not an issue for the Dead Air Wolverine. This suppressor uses the front sight detent pin as part of its attachment system. That means it can be easily mounted and dismounted from your AK pattern rifle.

Advertisement - Continue Reading Below

Not Just for AKs Though

The cool thing is that the Wolverine is rated for rounds up to 7.62x54R, aka the Mosin-Nagant round. It has available thread inserts as well, so if you want to mount it on a threaded barrel that’s an option. Theoretically, if you wanted to do something like thread a Mosin’s barrel and attach this…you could. Not that you should do something like that, but we’re just saying that the option exists.

Wolverine Specifications

Rating:Multi – Up to 7.62x54R
Length:7.4″ (with thread adapter)
Weight:19.8 oz – 24.4 oz depending on mount
Diameter:1.5″ tube, 1.93″ outside diameter
Finish:Cerakote body with nitrided parts
Min. Barrel Length:No Restrictions
Mount:Ships with a M14x1 LH thread insert and Collar
Available Thread Inserts:13mm RH Galil
14mm RH VZ-58
14x1mm LH AKM
14x1mm LH LONG threads
15mm RH HK
16mm RPD
24mm RH
24mm RH LONG threads
26mm LH PAP92
5/8×24
1/2×28
MSRP:$999

BROWSE BY BRAND

MORE VIDEOS