Introducing The Hornady 4DOF (Four Degrees of Freedom) Ballistic Calculator

The following is a press release from Hornady

Hornady, a world leader in bullet, ammunition and reloading products is pleased to announce the launch of the new Patent Pending Hornady 4DOF (Four Degrees of Freedom) Ballistic Calculator.

The Hornady 4DOF calculator provides trajectory solutions based on projectile Drag Coefficient (not ballistic coefficient) along with the exact physical modelling of the projectile and its mass and aerodynamic properties. Additionally, it is the first publicly available program that will correctly calculate the vertical shift a bullet experiences as it encounters a crosswind; referred to as aerodynamic jump. The use of drag coefficients, correct projectile dynamics, aerodynamic jump and spin drift enable the Hornady 4DOF ballistic calculator to be the most accurate commercially available trajectory program available, even at extreme ranges.

“Current ballistic calculators provide three degrees of freedom in their approach; windage, elevation and range, but treat the projectile as an inanimate lump flying through the air,” said Dave Emary, Hornady Chief Ballistician. “This program incorporates the projectile’s movement in the standard 3 degrees but also adds its movement about its center of gravity and subsequent angle relative to its line of flight, which is the fourth degree of freedom.”

Using Doppler radar, Hornady engineers have calculated exact drag versus velocity curves for each bullet in the 4DOF calculator library. Combined with the physical attributes of the projectiles, the 4DOF calculator is simply more accurate for long range hits than using BC based systems or custom drag curves based off of limited data collection points.

“This calculator doesn’t utilize BC’s (Ballistic Coefficients) like other calculators,” added Jayden Quinlan, Hornady Ballistics Engineer. “Why compare the flight of your bullet to a standard G1 or G7 projectile when you can use your own projectile as the standard?”

The Hornady® 4DOF™ Ballistic Calculator is available for free at: www.hornady.com/4dof

Founded in 1949, Hornady® Manufacturing Company is a family owned business headquartered in Grand Island, Nebraska. Proudly manufacturing products that are made in the USA by over 300 employees, Hornady® Manufacturing is a world leader in bullet, ammunition, reloading tool and accessory design and manufacture.

For further information regarding Hornady® products, visit the company web site at http://hornady.com.