Anchor ads are not supported on this page.

\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n
\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n
\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n
\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

I ended up taking the MR73 out to the range to \u201ctest\u201d on three different occasions. It wasn\u2019t absolutely necessary; it was just so much fun. That\u2019s not even considering the long line that formed within the ranks of my shooting buddies and gun shop friends. They all knew the reputation of the MR73 and wanted to give it a whirl.<\/p>\n\n\n\n

\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Range Report<\/strong><\/h4>\n\n\n\n

I ended up taking the MR73 out to the range to \u201ctest\u201d on three different occasions. It wasn\u2019t absolutely necessary; it was just so much fun. That\u2019s not even considering the long line that formed within the ranks of my shooting buddies and gun shop friends. They all knew the reputation of the MR73 and wanted to give it a whirl.<\/p>\n\n\n\n

\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Finally, in regard to its charms and appeal is what you can\u2019t see with the naked eye. The Manurhin gunsmiths spend a significant amount of time polishing and hand-fitting all of the parts. This also includes the time spent test firing the MR73. This ensures it shoots 15-round groups that are no larger than .80 inches at 25 yards. This is a demanding requirement. But is indicative of the special needs of the GIGN and other special units that conduct counter-terrorism and hostage-rescue operations.<\/p>\n\n\n\n

Range Report<\/strong><\/h4>\n\n\n\n

I ended up taking the MR73 out to the range to \u201ctest\u201d on three different occasions. It wasn\u2019t absolutely necessary; it was just so much fun. That\u2019s not even considering the long line that formed within the ranks of my shooting buddies and gun shop friends. They all knew the reputation of the MR73 and wanted to give it a whirl.<\/p>\n\n\n\n

\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n
\"The<\/a>
The front sight is a black blade, and the sight ramp is serrated for glare reduction.<\/figcaption><\/figure>\n\n\n\n

Finally, in regard to its charms and appeal is what you can\u2019t see with the naked eye. The Manurhin gunsmiths spend a significant amount of time polishing and hand-fitting all of the parts. This also includes the time spent test firing the MR73. This ensures it shoots 15-round groups that are no larger than .80 inches at 25 yards. This is a demanding requirement. But is indicative of the special needs of the GIGN and other special units that conduct counter-terrorism and hostage-rescue operations.<\/p>\n\n\n\n

Range Report<\/strong><\/h4>\n\n\n\n

I ended up taking the MR73 out to the range to \u201ctest\u201d on three different occasions. It wasn\u2019t absolutely necessary; it was just so much fun. That\u2019s not even considering the long line that formed within the ranks of my shooting buddies and gun shop friends. They all knew the reputation of the MR73 and wanted to give it a whirl.<\/p>\n\n\n\n

\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n
\"The<\/a>
The MR73\u2019s rear sight is of the two-dot variety and is adjustable for windage and elevation.<\/figcaption><\/figure>\n\n\n\n
\"The<\/a>
The front sight is a black blade, and the sight ramp is serrated for glare reduction.<\/figcaption><\/figure>\n\n\n\n

Finally, in regard to its charms and appeal is what you can\u2019t see with the naked eye. The Manurhin gunsmiths spend a significant amount of time polishing and hand-fitting all of the parts. This also includes the time spent test firing the MR73. This ensures it shoots 15-round groups that are no larger than .80 inches at 25 yards. This is a demanding requirement. But is indicative of the special needs of the GIGN and other special units that conduct counter-terrorism and hostage-rescue operations.<\/p>\n\n\n\n

Range Report<\/strong><\/h4>\n\n\n\n

I ended up taking the MR73 out to the range to \u201ctest\u201d on three different occasions. It wasn\u2019t absolutely necessary; it was just so much fun. That\u2019s not even considering the long line that formed within the ranks of my shooting buddies and gun shop friends. They all knew the reputation of the MR73 and wanted to give it a whirl.<\/p>\n\n\n\n

\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Up top, the MR73 includes a quality set of sights<\/a>, ideal for precise, long-range shots. The rear sight is serrated for glare reduction and sports two white dots. The front sight is a plane black blade that yields minimal daylight on the edges in the rear sight. While this choice may be staying true to the original MR73, I\u2019d prefer something with more visibility up front. Either a high-visibility dot in orange or yellow would work, or even a gold bead would help to a degree. Aside from that, the sights were spot-on and worked well during the range testing.<\/p>\n\n\n\n

\"The<\/a>
The MR73\u2019s rear sight is of the two-dot variety and is adjustable for windage and elevation.<\/figcaption><\/figure>\n\n\n\n
\"The<\/a>
The front sight is a black blade, and the sight ramp is serrated for glare reduction.<\/figcaption><\/figure>\n\n\n\n

Finally, in regard to its charms and appeal is what you can\u2019t see with the naked eye. The Manurhin gunsmiths spend a significant amount of time polishing and hand-fitting all of the parts. This also includes the time spent test firing the MR73. This ensures it shoots 15-round groups that are no larger than .80 inches at 25 yards. This is a demanding requirement. But is indicative of the special needs of the GIGN and other special units that conduct counter-terrorism and hostage-rescue operations.<\/p>\n\n\n\n

Range Report<\/strong><\/h4>\n\n\n\n

I ended up taking the MR73 out to the range to \u201ctest\u201d on three different occasions. It wasn\u2019t absolutely necessary; it was just so much fun. That\u2019s not even considering the long line that formed within the ranks of my shooting buddies and gun shop friends. They all knew the reputation of the MR73 and wanted to give it a whirl.<\/p>\n\n\n\n

\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n
\"Crafted<\/a>
Crafted from top-quality parts and with attention to fit, finish and detail, the MR73 looks as good as it shoots.<\/figcaption><\/figure>\n\n\n\n

Up top, the MR73 includes a quality set of sights<\/a>, ideal for precise, long-range shots. The rear sight is serrated for glare reduction and sports two white dots. The front sight is a plane black blade that yields minimal daylight on the edges in the rear sight. While this choice may be staying true to the original MR73, I\u2019d prefer something with more visibility up front. Either a high-visibility dot in orange or yellow would work, or even a gold bead would help to a degree. Aside from that, the sights were spot-on and worked well during the range testing.<\/p>\n\n\n\n

\"The<\/a>
The MR73\u2019s rear sight is of the two-dot variety and is adjustable for windage and elevation.<\/figcaption><\/figure>\n\n\n\n
\"The<\/a>
The front sight is a black blade, and the sight ramp is serrated for glare reduction.<\/figcaption><\/figure>\n\n\n\n

Finally, in regard to its charms and appeal is what you can\u2019t see with the naked eye. The Manurhin gunsmiths spend a significant amount of time polishing and hand-fitting all of the parts. This also includes the time spent test firing the MR73. This ensures it shoots 15-round groups that are no larger than .80 inches at 25 yards. This is a demanding requirement. But is indicative of the special needs of the GIGN and other special units that conduct counter-terrorism and hostage-rescue operations.<\/p>\n\n\n\n

Range Report<\/strong><\/h4>\n\n\n\n

I ended up taking the MR73 out to the range to \u201ctest\u201d on three different occasions. It wasn\u2019t absolutely necessary; it was just so much fun. That\u2019s not even considering the long line that formed within the ranks of my shooting buddies and gun shop friends. They all knew the reputation of the MR73 and wanted to give it a whirl.<\/p>\n\n\n\n

\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

As mentioned earlier, the MR73\u2019s construction uses high-grade ordnance steel and it must be really good stuff. Despite its size being similar to a Smith & Wesson K-frame revolver, the MR73 can reportedly withstand twice the pressure of a standard 158-grain .357 Magnum<\/a> round. Another significant feature is the cold hammer-forged barrel. The rifling is formed during the forging process, resulting in a much longer service life.<\/p>\n\n\n\n

\"Crafted<\/a>
Crafted from top-quality parts and with attention to fit, finish and detail, the MR73 looks as good as it shoots.<\/figcaption><\/figure>\n\n\n\n

Up top, the MR73 includes a quality set of sights<\/a>, ideal for precise, long-range shots. The rear sight is serrated for glare reduction and sports two white dots. The front sight is a plane black blade that yields minimal daylight on the edges in the rear sight. While this choice may be staying true to the original MR73, I\u2019d prefer something with more visibility up front. Either a high-visibility dot in orange or yellow would work, or even a gold bead would help to a degree. Aside from that, the sights were spot-on and worked well during the range testing.<\/p>\n\n\n\n

\"The<\/a>
The MR73\u2019s rear sight is of the two-dot variety and is adjustable for windage and elevation.<\/figcaption><\/figure>\n\n\n\n
\"The<\/a>
The front sight is a black blade, and the sight ramp is serrated for glare reduction.<\/figcaption><\/figure>\n\n\n\n

Finally, in regard to its charms and appeal is what you can\u2019t see with the naked eye. The Manurhin gunsmiths spend a significant amount of time polishing and hand-fitting all of the parts. This also includes the time spent test firing the MR73. This ensures it shoots 15-round groups that are no larger than .80 inches at 25 yards. This is a demanding requirement. But is indicative of the special needs of the GIGN and other special units that conduct counter-terrorism and hostage-rescue operations.<\/p>\n\n\n\n

Range Report<\/strong><\/h4>\n\n\n\n

I ended up taking the MR73 out to the range to \u201ctest\u201d on three different occasions. It wasn\u2019t absolutely necessary; it was just so much fun. That\u2019s not even considering the long line that formed within the ranks of my shooting buddies and gun shop friends. They all knew the reputation of the MR73 and wanted to give it a whirl.<\/p>\n\n\n\n

\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

Solid Construction<\/strong><\/h4>\n\n\n\n

As mentioned earlier, the MR73\u2019s construction uses high-grade ordnance steel and it must be really good stuff. Despite its size being similar to a Smith & Wesson K-frame revolver, the MR73 can reportedly withstand twice the pressure of a standard 158-grain .357 Magnum<\/a> round. Another significant feature is the cold hammer-forged barrel. The rifling is formed during the forging process, resulting in a much longer service life.<\/p>\n\n\n\n

\"Crafted<\/a>
Crafted from top-quality parts and with attention to fit, finish and detail, the MR73 looks as good as it shoots.<\/figcaption><\/figure>\n\n\n\n

Up top, the MR73 includes a quality set of sights<\/a>, ideal for precise, long-range shots. The rear sight is serrated for glare reduction and sports two white dots. The front sight is a plane black blade that yields minimal daylight on the edges in the rear sight. While this choice may be staying true to the original MR73, I\u2019d prefer something with more visibility up front. Either a high-visibility dot in orange or yellow would work, or even a gold bead would help to a degree. Aside from that, the sights were spot-on and worked well during the range testing.<\/p>\n\n\n\n

\"The<\/a>
The MR73\u2019s rear sight is of the two-dot variety and is adjustable for windage and elevation.<\/figcaption><\/figure>\n\n\n\n
\"The<\/a>
The front sight is a black blade, and the sight ramp is serrated for glare reduction.<\/figcaption><\/figure>\n\n\n\n

Finally, in regard to its charms and appeal is what you can\u2019t see with the naked eye. The Manurhin gunsmiths spend a significant amount of time polishing and hand-fitting all of the parts. This also includes the time spent test firing the MR73. This ensures it shoots 15-round groups that are no larger than .80 inches at 25 yards. This is a demanding requirement. But is indicative of the special needs of the GIGN and other special units that conduct counter-terrorism and hostage-rescue operations.<\/p>\n\n\n\n

Range Report<\/strong><\/h4>\n\n\n\n

I ended up taking the MR73 out to the range to \u201ctest\u201d on three different occasions. It wasn\u2019t absolutely necessary; it was just so much fun. That\u2019s not even considering the long line that formed within the ranks of my shooting buddies and gun shop friends. They all knew the reputation of the MR73 and wanted to give it a whirl.<\/p>\n\n\n\n

\"Despite<\/a>
Despite the Beretta Manurhin MR73 revolver\u2019s light weight, recoil was still very manageable. This is even with hot and heavy loads from DoubleTap and Buffalo Bore.<\/figcaption><\/figure>\n\n\n\n

Despite this trying time of scarce and prohibitively expensive ammunition, we just couldn\u2019t help ourselves. We ended up shooting six different premium loads from Buffalo Bore<\/a>, Speer<\/a>, Hornady<\/a>, Sig Sauer<\/a> and DoubleTap<\/a> ammunition. On top of that, we also shot a good supply of Sig Sauer\u2019s range ammo\u2014125-grain Elite Ball FMJ loads. All in all, the results from just about every aspect of the experience were superb.<\/p>\n\n\n\n

First Shots<\/strong><\/h4>\n\n\n\n

First up was bench testing at 25 yards, and no, I did not try for or achieve 15-shot, .80-inch groups. I\u2019m just a mere mortal with aging eyes. Besides, I\u2019m sure the smiths at Manurhin have a Ransom rest or other such fixed apparatus to competently test the accuracy of their barrels. I settled for a simple CTK Precision pistol rest and five-shot groups instead. Even so, I shot some of the best groups I\u2019ve ever shot with a revolver (unscoped) at 25 yards.<\/p>\n\n\n\n

\"From<\/a>
From a simple rest at 25 yards, the MR73 shot most groups at or under 1.5 inches. This was repeated with various ammunition types and weights.<\/figcaption><\/figure>\n\n\n\n

There were certainly some brands and loads the MR73 preferred over others. However, the average size for all loads was in the range of 1.33 to 2.29 inches. But when it found a load it liked, it was on like Donkey Kong. Its two preferred loads were Sig\u2019s 125-grain Elite V-Crown and Buffalo Bore\u2019s 158-grain JHP. The best group from Sig Sauer was an astonishing 0.88 inches, with an average group size of 1.33 inches. Buffalo Bore\u2019s round averaged 1.50 inches with a best group of 1.28 inches.<\/p>\n\n\n\n

Just a hair behind was Speer\u2019s 125-grain GDHP at an average of 1.51 inches. There\u2019s enough human variables involved to say it was a toss-up with these three loads. With my relatively short time with the MR73, there\u2019s no question for me that Manurhin can obtain .80-inch groups in a test environment where failing sight and consistent alignment isn\u2019t a factor. To be honest, I thought the .88-inch group was just a happy accident on my part. But I do believe the MR73 is just really that good.<\/p>\n\n\n\n

Having Some Fun<\/strong><\/h4>\n\n\n\n

But the real fun came with addressing targets in double-action mode. With the trigger\u2019s exceptionally smooth, clean stroke, everybody walked away feeling like a real gunslinger. At 7 yards, 1-inch groups were easily obtained during our offhand shooting. In fact, a couple of guys were shooting rounds into just one hole offhand. By all accounts with those that gave the MR73 a try, it definitely lived up to its reputation for accuracy.<\/p>\n\n\n\n

The only negative interaction with it had to do with the grip and recoil with some of the heavier loads. The grip fit most of us just fine, but a couple of guys have large hands. They said it felt a little tight trying to squeeze their hand in between the top and the bottom of the Trausch grip. Otherwise, the grip worked well for almost all of us. It provided excellent traction, and the top part of the grip did wonders in helping to reduce muzzle flip during recoil, even with the hotter loads.<\/p>\n\n\n\n

\"MR73<\/a><\/figure>\n\n\n\n

Speaking of recoil, the Sport version is relatively slight of stature for .357 Magnum\u2014even with its high-grade construction. It weighs in at 37 ounces, a few ounces lighter than a Ruger GP100 with a 4-inch barrel. When we got to the heavy loads from Buffalo Bore and DoubleTap, the recoil was pretty dang stout, even with the superb Trausch grip. My middle finger took a bit of a beating from the triggerguard with those loads. Even the 125-grain Speer load offered a good thump. But the loads from Hornady and Sig Sauer were downright pleasant to shoot, so there\u2019s something out there for everybody.<\/p>\n\n\n\n

Best Of The Breed<\/strong><\/h4>\n\n\n\n

It should come as no surprise that with all of the polishing and hand fitting of parts for that incredibly smooth action and phenomenal accuracy, there\u2019s going to be a high price to pay. The MR73 rings in at an MSRP of $3,300 here in the United States. Some may shake their heads at the price and others might simply not be able to afford it. But there\u2019s little question that the MR73 is the finest-made factory revolver in the world. And there\u2019s always a high price for excellence.<\/p>\n\n\n\n

With its high-polish, mirror finish and gold accents, there is the temptation to place the MR73 under glass for occasional viewing. Especially to keep oil and fingerprints away. But that would almost be an injustice. The MR73 is a thoroughbred that performs at the highest level. While it\u2019s nice to have a thoroughbred in your stable, the real magic only happens when you let it run. For more information, visit Beretta.com\/en-us\/manurhin<\/a>.<\/p>\n\n\n\n

Beretta Manurhin MR73 Revolver Specs<\/strong><\/h4>\n\n\n\n

Caliber:<\/strong> .357 Mag.\/.38 SPL
Barrel:<\/strong> 5.25 inches
Overall Length:<\/strong> 10.39 inches
Weight:<\/strong> 37 ounces (empty)
Width:<\/strong> 1.70 inches
Grip:<\/strong> Trausch Target
Sights:<\/strong> Blade front, adjustable rear
Action:<\/strong> DA\/SA
Finish:<\/strong> Blued
Capacity:<\/strong> 6
MSRP:<\/strong> $3,300<\/p>\n\n\n\n

This article was originally published in the Tactical Life Aug\/Sept 2021 issue. Subscription is available in print and digital editions at OutdoorGroupStore.com<\/a><\/em><\/em>. Or call 1-800-284-5668, or email subscriptions@athlonmediagroup.com.<\/p>\n","post_title":"The Masterful Beretta Manurhin MR73 Revolver Hits the American Market","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"beretta-manurhin-mr73-revolver","to_ping":"","pinged":"","post_modified":"2023-05-31 16:11:20","post_modified_gmt":"2023-05-31 16:11:20","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.athlonoutdoors.com\/2021\/09\/01\/beretta-manurhin-mr73-revolver\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":2},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};

POPULAR

BROWSE BY BRAND

\n

The MR73, quite simply, has the best double-action trigger pull of any revolver I have ever tried. The DA pull registered an average weight of 7.81 pounds on my Lyman digital gauge. More important than the weight, however, is that the pull is incredibly smooth and has a relatively short throw for a revolver. This translates to almost zero movement in the gun during the stroke. This allows the shooter to stay on target during the double-action pull. The single-action pull and break was also quite nice at 3.88 pounds. But that double-action pull is what it\u2019s all about for those that take it into harm\u2019s way.<\/p>\n\n\n\n

Solid Construction<\/strong><\/h4>\n\n\n\n

As mentioned earlier, the MR73\u2019s construction uses high-grade ordnance steel and it must be really good stuff. Despite its size being similar to a Smith & Wesson K-frame revolver, the MR73 can reportedly withstand twice the pressure of a standard 158-grain .357 Magnum<\/a> round. Another significant feature is the cold hammer-forged barrel. The rifling is formed during the forging process, resulting in a much longer service life.<\/p>\n\n\n\n

\"Crafted<\/a>
Crafted from top-quality parts and with attention to fit, finish and detail, the MR73 looks as good as it shoots.<\/figcaption><\/figure>\n\n\n\n

Up top, the MR73 includes a quality set of sights<\/a>, ideal for precise, long-range shots. The rear sight is serrated for glare reduction and sports two white dots. The front sight is a plane black blade that yields minimal daylight on the edges in the rear sight. While this choice may be staying true to the original MR73, I\u2019d prefer something with more visibility up front. Either a high-visibility dot in orange or yellow would work, or even a gold bead would help to a degree. Aside from that, the sights were spot-on and worked well during the range testing.<\/p>\n\n\n\n

\"The<\/a>
The MR73\u2019s rear sight is of the two-dot variety and is adjustable for windage and elevation.<\/figcaption><\/figure>\n\n\n