Anchor ads are not supported on this page.

Search
Close this search box.
Search
Close this search box.

Top 16 Aftermarket AR Grips & Rails

It’s not just important for you to be able to control your AR rifle while firingit’s critical for precise aiming. And what if you want to add accessories like lights, lasers, or a bipod? That’s why dozens of companies offer aftermarket AR grips and rails. Not every shooter is the same, and these options make it a little easier for you to customize your rifle so it fits you and your needs better. These aftermarket AR grips and rails get the job done.

A*B Arms MOD1 Handguard

ar rifle rails by ab arms

The MOD1 handguard is a two-piece design that incorporates upper and lower heat shields to protect your hand from a hot barrel. It accommodates either gas piston or direct-impingement systems, and it comes in black, OD green, or Flat Dark Earth. abarms.com

A*B Arms SBR P*Grip

ar rifle grips by ab arms

The SBR P*Grip is a lightweight, ergonomic pistol grip made from high-heat-rated nylon with high-strength fibers, and it features a weather-resistant internal storage compartment that will fit two AA batteries or one CR123 battery. It’s available in black or Flat Dark Earth. abarms.com

Aero Precision M5 Handguards

ar rifle rails by aero precision

Aero Precision’s 12.7-, 16.6- and 15-inch-long M5 handguards are available with either KeyMod or M-LOK slots for mounting accessories. These free-floating handguards are made from one piece of lightweight 6061-T6 aluminum with anti-rotation tabs. Their 1.8-inch inside diameters accommodate most muzzle devices and suppressors. aeroprecisionusa.com

BCM Gunfighter Grip Mod 3

ar rifle grips by bravo company use

The BCM Gunfighter Grip Mod 3 offers a reduced angle for better ergonomics and trigger control. It is wider than Mod 1 and Mod 2 grips and features an extended forward tang that closes the gap between the triggerguard and pistol grip. The backstrap is similar to a high-rise beavertail. The bottom features a trapdoor to access a small water-resistant storage compartment inside the grip. Black and Flat Dark Earth versions are available.

BCM Gunfighter Vertical Grip Mod 3

ar rifle grips by bcm

Bravo Company offers these compact, low-profile vertical foregrips for both Picatinny and KeyMod interfaces. These grips are also reversible for additional control. Black and Flat Dark Earth versions are currently available. bravocompanyusa.com

BCM KMR-A Handguards

ar rifle rails by bcm

Bravo Company’s KeyMod Rail-Alpha (KMR-A) handguards offer KeyMod slots for accessories made from aluminum, making them lightweight and durable. Each KMR-A handguard features a proprietary patent-pending mounting system that mitigates rail movement. BCM offers 10-, 13- and 15-inch-long versions in black. bravocompanyusa.com

Brigand Arms Atlas NOAX

atlas handguard noax

The Atlas NOX handguard uses a patented, open carbon-fiber design that offers strength while being super lightweight. The unique material design rejects heat so it will not get hot under extended use. Brigand Arms offers 7-, 9-, 12-, and 15-inch versions. brigandarms.com

Ergo MSR Grip

ergo grip ar rifle

The Ergo MSR grip is designed with an improved shape and texture for more comfort and control. This pistol grip is made of a durable polymer that is impact and heat-resistant. ergogrips.net

Hogue 15-Degree Grips

hogue 15 degree grip

Made of G10, Hogue’s AR-15/M16 15-Degree Grips offer a more natural angle for shooting comfort without finger grooves. These grips are either smooth or come with Piranha texturing. Hogue offers these grips in Flat Dark Earth, OD Green, and black. hogueinc.com

Hogue Beavertail Rubber Grips

hogue ar rifle grip

Hogue’s AR-15/M16 Beavertail Rubber Grips are available with or without finger grooves and pebble texturing for a secure grip. The beavertail helps supports the web of an operator’s hand, and models are available in aqua, pink, black, Ghillie Green, red lava, OD Green, Flat Dark Earth, purple, and slate gray. hogueinc.com

Lancer LCR5 Handguards

lancer ar rifle rail

Lancer’s free-floating LCR5 handguards are round forends made of lightweight, rugged carbon fiber. Aluminum receiver extensions ensure they attach solid securely to the upper receiver. Carbine-, mid-, and rifle-length versions are available, and Lancer’s LCH5 handguards incorporate full-length top rails. lancer-systems.com

MFT Engage Grips

mft ar rifle grip

The original Engage pistol grip from Mission First Tactical (MFT) has finger grooves and texturing to provide a positive grip. There is a built-in watertight storage compartment on the bottom. The company’s V2 renditions have 15-degree angles for improved control and handling ergonomics. Both grips are available in black, and Scorched Dark Earth. missionfirsttactical.com

Stark One Grip

stark one ar rifle grip

The Stark One rifle grip incorporates a sling mount above the hand and below the buffer tube. Two versions are available: one with a hook mount and one with a swivel mount. The rifle grip is compatible with M4-style adjustable stocks, even when the stock is fully collapsed. The grip itself fits a variety of hand sizes, and the integrated triggerguard is oversized for use with gloves. starkequipment.com

TangoDown BG-17 Battlegrip

tangodown ar rifle grip

The soft, hand-filling BG-17 Battlegrip is the big brother of the company’s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com

TangoDown BG-FG Flip-Grip

TangoDown BG-FG ar rifle grip

The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com

UTG Pro M-LOK Super Slim Handguards

UTG pro ar rifle rail

These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com

BROWSE BY BRAND

MORE VIDEOS