Anchor ads are not supported on this page.

Of course, FN has realized that AR-platform modern sporting rifles (MSRs) are inarguably the hottest sellers in the country. There are a lot of the black guns being manufactured, but many are priced beyond the budget of many enthusiasts and potential shooters. Quite a few manufacturers have tackled the price difficulties by adding a line of \u201cvalue-driven\u201d ARs. These usually do not incorporate all the extras of the more expensive AR-style rifles but still retain similar quality and workmanship.<\/p>\r\n

In many minds, an MSR has to cost a lot to be worth its salt. Sure, entry-level ARs may be missing specialty, non-budget AR items. But a well-assembled carbine using properly specified parts of the correct materials will yield exactly what is expected\u2014a hunting, competition or defensive rifle that will work when needed.<\/p>\r\n

FN understands the desire so many have to own an MSR, the descendant of a weapon that received its baptism of fire in Vietnam in the 1960s and remains the U.S. military\u2019s weapon today. For over a quarter of a century, FN has been providing ARs to our military\u2014proof the company knows how to produce guns that shoot every single time. As you probably know, military use demands \u201clife on the line\u201d reliability and performance.<\/p>\r\n

FNs For All<\/i><\/b><\/span><\/p>\r\n

Recently, FNH USA introduced a new line of high-quality ARs at affordable prices. The FN 15 series began with two variants but now includes seven models for discerning shooters. Each model has specific features that set it apart. The FN 15 Rifle, for example, features a fixed stock, a traditional polymer forend, a flattop upper, an A2-style carry handle\/rear sight, an A2-style front sight and a 20-inch barrel. The FN 15 MOE SLG has a 16-inch barrel and gray Magpul SL furniture as well as a Magpul MBUS rear sight to match the A2-style front sight. The FN 15 Tactical also uses a 16-inch barrel but sports a Magpul MOE grip, a Magpul SL stock, Magpul MBUS front and rear sights and a 12-inch Midwest Industries M-LOK handguard.<\/p>\r\n

There are two 18-inch-barreled carbines that come with Timney competition triggers: the 5.56mm FN 15 DMR, with its 15-inch Midwest Industries SSM M-LOK handguard and Magpul STR stock, MOE grip and MBUS Pro sights, and the FN 15 Sporting chambered in .223 Remington, which includes a match-grade barrel and a 15-inch Samson Evolution handguard.<\/p>\r\n

Finally, you have the mil-spec FN 15 Carbine and the newest addition to the lineup: the\u00a0FN 15 1776. A removable carry handle\/rear sight rides atop the flattop upper receiver of the FN 15 Carbine, and the lower receiver is equipped with a six-position-collapsible buttstock. The 16-inch barrel is surrounded by a traditional two-piece polymer handguard.<\/p>\r\n

But now let\u2019s talk about the FN 15 1776, which I recently got a chance to test.<\/span><\/p>\r\n

Patriot\u2019s Rifle<\/i><\/b><\/span><\/p>\r\n

According to FNH USA, the FN 15 1776 is \u201cis designed to be high performance, value-priced and optics ready, perfect for shooters looking for a base rifle to customize to their liking.\u201d<\/p>\r\n

The FN 15 1776 starts with a 16-inch, alloy steel, button-broached, government-profile barrel with a 1-in-7-inch twist rate, a 5.56mm NATO chamber and\u00a0M4 feed ramps. An A2-style flash suppressor caps the muzzle, and surrounding the gas system and barrel is a traditional polymer handguard. The upper has a Picatinny rail on top for mounting sights an<\/span>d optics. The FN 15 1776 ships without sights in keeping with the \u201coptics ready\u201d format. With just the flattop rail, it wouldn\u2019t be very effective to add front and rear sights so close together. Of course, offset sights from XS Sights, Dueck Defense, Diamondhead, GG&G and others should be able to be work if you\u2019re dead set on having backup sights because of their immediate-range intent.<\/span><\/p>\r\n

The lower receiver features an A2-style pistol grip, a six-position-collapsible buttstock and traditional AR controls. The trigger is a mil-spec-style, single-stage unit, and my test rifle\u2019s trigger broke at 7.4 pounds on average with a little grittiness. The receivers are hardcoat anodized black, and the rifle ships with a 30-round Magpul Gen 3 PMAG.<\/span><\/p>\r\n

Born To Shoot<\/i><\/b><\/span><\/p>\r\n

To test the FN 15 1776 on the range, I added an EOTech XPS3 holographic weapon sight. It slid on and worked perfectly. As expected, since the FN 15 1776 is made by a company that has produced countless numbers of ARs for the U.S.<\/p>\r\n

military and others, the rifle ran flawlessly through the exercises I usually work carbines through. Close and far, from 7 yards out to 75, the FN 15 1776 purred right along. I ran the carbine with polymer and metal magazines from several manufacturers with no effect on the FN 15 1776\u2019s performance. The rifle\u2019s light weight made it easy to handle, and it quickly transitioned between targets.<\/p>\r\n

Moving to the 100-yard range, I decided to forego using a scope and see just how well my eyes, the EOTech XPS3 and the FN 15 1776 carbine would work together to product five-shot groups. Quite a few rounds later, I had a number of targets on hand with .22-caliber holes bunched together in small groups. It seemed the XPS3 and the FN 15 1776 were a pretty good team.<\/p>\r\n

At 100 yards, the groups averaged around 2.1 inches from the bench. Experience has shown that I can usually shoot groups around 3 inches or smaller with a good 1X red dot. That kind of accuracy usually translates to 1- or 1.5-inch groups with a nice scope with descent magnification. I expect that the FN 15 1776, despite not being billed as a target rifle, would be able to drop five shots into groups less than 1 inch with the right optic. Not too bad!<\/span><\/p>\r\n

PROVEN PERFORMER<\/i><\/b><\/span><\/p>\r\n

The range time proved that the FN 15 1776 was quite capable of self-defense or competition accuracy, and more. Its reliability proves it is qualified for use in dangerous situations. Are there any things I\u2019d like to see FNH USA change? No, not really. As a belt-and-suspender kind of guy, however, if it were mine I would probably add offset sights.<\/p>\r\n

Of course, that\u2019s just a personal preference. The fact is that the FN 15 1776 is a great way to start off as an AR owner. It is optics ready, built on a solid platform, and can easily be modified as the consumer wants. Bottom line: After you add an optic, the FN 15 1776 is ready to go.<\/p>\r\n\r\n